Step 3: Complete your enrolment
Remove Non-Friable and Friable Asbestos (Class A and B) (SYD # RNFA+RFA C105750)
26/8/2024 to 29/8/2024
CPCCDE3015 Remove friable asbestos
CPCCDE3014 Remove non-friable asbestos

Our nationally recognised four day Remove Friable and Non-Friable Asbestos course is designed for a worker who is required to manage or remove both friable and/or non-friable asbestos containing material (ACM) in Australia. The course includes preparing, enclosing and removing friable and non-friable ACM, and knowledge of decontamination and disposal requirements. This training course is taught by experienced instructors who will outline theory and practical scenarios that are relevant to your work site. This training course is very hands on with at least 50% of the time allotted to the practical aspects of operating in an asbestos-contaminated worksite.

  • Legislative requirements and compliance
  • Licensing requirements
  • Hazards of asbestos and health effects
  • Planning and preparing for asbestos removal
  • Completion of risk assessment, asbestos registers and management plans
  • Methods of isolation of the work site
  • Full enclosure setup, testing and removal
  • Carry out asbestos removal process
  • Decontamination of workers, plant and equipment (three phase process) 
  • Correct asbestos disposal techniques
  • Clean up work site
  • Contribute to and use documentation in line with regulatory requirements


  • We supply all equipment necessary for you to undertake training
  • Training is conducted by experienced industry experts
  • Plenty of practical hands on training
  • Nationally Recognised Statement of Attainment on successful completion

Important considerations for participants

  • This training is realistic, somewhat physical and may involve working in hot or cold environments whilst suited up in PPE. It is important that all personnel who attend this course have a suitable level of fitness and are willing and capable of moving about in a small enclosed room, and wearing face masks.
  • This course requires practice in wearing correct, full PPE and undertaking personal decontamination techniques, therefore participants must be prepared to wear shorts and T-shirt under coveralls.
  • Participants must bring additional clothing - shorts, singlet top/T-shirt and a pair of thongs (flip-flops) for the practical activity.



  • All participants must hold CPCCWHS1001 - 'Prepare to work safely in the construction industry' OR CPCCOHS1001A - 'Work safely in the construction industry' obtained after 11 May 2009. This is commonly known as a 'White Card'.
  • If you do not supply your White Card to your trainer on the first day of training your enrolment will be cancelled and you will not be permitted entry to the course. If this occurs, our terms and conditions will apply and therefore your course fee will not be refunded or held in credit.
  • NOTE: If your White Card was issued prior to 11 May 2009, we cannot recognise this as a valid prerequisite, as it does not prove that you were assessed against the correct unit of competency.


SafeWork NSW require that participants must supply original evidence of identity (EOI) documents that add up to at least 100 points. Within these documents participants must be able to show:

  • a photo
  • date of birth (minimum age 14 years)
  • signature
  • current residential address
  • Click here to view document types and their associated points. Participants who have enrolled in this program are encouraged to use this document to prepare their documents ahead of the course.
  • These documents must be supplied to the trainer on the first day of training. Failure to supply the required documents will result in exclusion from the course and rebooking fees will apply.
Primary (only use one primary document) Points (one document only)
  • Australian Birth Certificate/card (minimum 14 years) issued by the Registrar of Births Deaths and Marriages
  • Australian or international passport (current or expired within last two years, but not cancelled)
  • Australian citizenship certificate
Secondary Points (per document)
  • Current Australian state or territory driver’s licence or learner driver licence/permit
  • Current Australian state or territory boat operators photo licence (eg personal watercraft driving licence)
  • Current NSW firearms photo licence
  • Current Australian issued high risk work licence
  • Current Australian state/territory proof of age or photo card (eg a NSW RMS issued photo card)
  • Australian Police or Dept of Defence card (with photo)
The following documents are accepted Points (per document)
  • Department Veterans Affairs card
  • Current Centrelink card
  • Property (council) rates notice issued in the last three (3) months
  • Property lease agreement
  • Home insurance papers
  • Utility bills issued in the last three (3) months
  • Current motor vehicle registration
  • Motor vehicle insurance papers
  • Telephone account issued in the last three (3) months
  • Current Medicare card
  • Credit/Savings cards/ Bank statements (1)
  • Credit/Savings cards/ Bank statements (2)

Note: If using credit/savings cards or statements (up to a maximum of 2), these must be from different financial institutions.

1 credit/savings card or statement equates to 25 points, 2 equals 50 points.



SAVE TIME! If you have booked with us before, the confirmation email you received contained a username and password. If you use these details to log in, our system will pre-fill your details.


Student: (book one person)
Employer: (book one or more people)

You may also free type date of birth in dd/mm/yyyy format.

All students studying nationally recognised training in Australia from 1 January 2015, are required to have a Unique Student Identifier (USI). A USI is a code made up of numbers and letters. Your USI will allow online access to your training records and results. We cannot generate your certificate until your USI is provided.

If you do not have a USI, please click here to create one in a new window (takes about 3 minutes). Once complete, copy your USI into the above field. If you need help with this process, please call us on 1300 990 810.
You must provide one valid phone number (10 digits)
School Details
  • Not Stated
  • Yes
  • No
Other Details
  • Not Stated
  • Yes
  • No
  • Not Stated
  • Yes
  • No